Non-phenolic, general purpose soluble cutting fluid. For use in a wide range of machining operations, but particularly suitable for use with steel & cast iron components. Good anti-corrosion properties. Short term protection against rusting. Contains highly refined mineral oil, emulsifiers & additives. Not recommended for use with copper alloys. SPECIFICATION: Physical Characteristics. Boiling range: above 100C. Flash point: above 100C. pH (working dilution):10 (2%). Relative density (at 20C):0.895. Water solubility:emulsifiable. Recommended Concentration. Milling, drilling & turning:3-5%. Sawing:3-5%. Reaming, tapping & screwing:8%. Grinding:2-5%. Stability & Reactivity. Will not polymerise. Avoid temperatures above 60C. Avoid strong acids & oxidising. agents.
- Non-phenolic, general purpose soluble cutting fluid
- For use in a wide range of machining operations, but particularly suitable for use with steel & cast iron components
- Good anti-corrosion properties
- Short term protection against rusting
- Contains highly refined mineral oil, emulsifiers & additives
- Not recommended for use with copper alloys
SPECIFICATION
Physical Characteristics
Boiling range: above 100C
Flash point: above 100C
pH (working dilution): 10 (2%)
Relative density (at 20C): 0.895
Water solubility: emulsifiable
Recommended Concentration
Milling, drilling & turning: 3-5%
Sawing: 3-5%
Reaming, tapping & screwing: 8%
Grinding: 2-5%
Stability & Reactivity
- Will not polymerise
- Avoid temperatures above 60C
- Avoid strong acids & oxidising
- agents
